Changes between Version 18 and Version 19 of WikiStart

Timestamp:

2011-09-15 19:33:09 (13 years ago)

Author:

mcvflorin

Comment:

--

WikiStart

@@ -77 +77 @@
 When a partition is in the '''!NotReady''' state, the plugin will attempt to send the '''star(*)''' command to get the faulted zones. If there are two or more active partitions the plugin will use the '''GOTO''' command to switch to the partition the command was issued for. This command requires a user code valid for that partition. The plugin stores the user code for every partition in an internal variable to use it '''ONLY''' for getting the faulted zones (all the other commands still require the PIN code). If no previous command has been given to this partition, no PIN code will be available, which means that it won't be possible to get the faulted zones. This is what the '''Store''' button is for. If you see that a partition is in the ''!NotReady'' state, but the faulted zones list is empty, enter the PIN code in the ''PIN code'' field and store it. After this, you should see the faulted zones list being populated.
 
-=== Notes ===
-* '''ALL''' the partition actions require the correct PIN code. The reason for this is that the plugin doesn't know what partition the AD2USB is assigned to, or even if it's assigned to any. So the plugin first executes a GOTO command, which requires the PIN code of the target partition.
-
-* After performing an action using the PIN code, it is stored in an internal variable, and it will be used ONLY for getting the faulted zones.
-
 === Debugging ===
 By default, the plugin logs only the important events, like the alarms and errors. To enable verbose logging for this plugin open the ''Advanced'' tab in the panel device's Control Panel and set '''!DebugMode''' to '''1''', then restart Luup.