Changes between Version 4 and Version 5 of ConnectingRadioModule

Timestamp:

2013-09-02 10:12:04 (11 years ago)

Author:

hek

Comment:

--

ConnectingRadioModule

@@ -4 +4 @@
 Use the dupont cables to connect the nRF24L01 to your Arduino board.
 
-||= Signal (RF24) =||= nRF24L01 pin =||= Cable color(*) =||= Arduino pin =|| 
-||GND|| 1||     Brown|| GND||
-||VCC|| 2||     Red||   3.3V||
-||CE||  3||     Orange||        9||
-||CSN|| 4||     Yellow||        10||
-||SCK|| 5||     Green|| 13||
-||MOSI||        6||     Blue||  11||
-||MISO||        7||     Violet||        12||
-||IRQ|| 8||     Gray||  2 *||
+||= Signal  =||= nRF24L01 pin (RF24) =||= Cable color(*) =||= Arduino pin =|| 
+||GND||1||Brown||GND||
+||VCC||2||Red||3.3V||
+||CE||3||Orange||9||
+||CSN||4||Yellow||10||
+||SCK||5||Green||13||
+||MOSI||6||Blue||11||
+||MISO||7||Violet||12||
+||IRQ||8||Gray||2 (*)||
 (*) optional