Introduction
This component permits the registration of National Control Devices (NCD) Relay Control boards with Vera. The use of these devices allows up to 8 Relays, and 8 Analog inputs to be put under the control of Vera manual and Scene control.
This Plugin allows the IORelay board to show up as a series of up to 8 Light Switches (On / Off) for the relays under control, and up to 8 Light Sensors (0-100%) for the inputs.
For the purposes of Development, the following control boards were used:
- 2 Relay, 8 Analog input ProXR Lite
- 2 Relay, 8 Analog input Reactor Relay
But the same API is used for their Relay boards up to 8 relays, so other types should work also.
Additionally, I've added the following Wifi device:
- Roving Networks RN-XV "Xvee" Wifi Adapter
- Mill-Max 50pin 2mm Riser (*)
to replace the on-Board USB device for one of my Relays since it will be remote from Vera. You can order the above devices without the on-Board USB adapter (as needed)
NOTE: (*) When using the Roving Networks RN-XV, the riser is needed to raise the RN-XV "above" the Relay board to have it seat correctly.
Installation
- For UI4 Installation, please follow the UI4 Installation procedure
Scenes
TODO:
Debugging
- For debugging tips, please follow the Debugging tips?
References
Attachments
- IORelayDevice-UI4.png (58.0 KB) - added by guessed 13 years ago.
- IORelayProXRLite.jpeg (184.9 KB) - added by guessed 13 years ago.
- IORelayReactorRelay.jpeg (132.6 KB) - added by guessed 13 years ago.