Connecting Radio Module

Wire things up

Use the dupont cables and follow the table below to connect the nRF24L01 to your Arduino board.

For more information about the radio chip, have a look here:
​http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01

For a more comprehensive guide how to connect radio chip (use RF24 library setup):
​http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo

Signal	nRF24L01 pin (RF24)	Cable color(*)	Arduino pin
GND	1	Brown	GND
VCC	2	Red	3.3V
CE	3	Orange	9
CSN	4	Yellow	10
SCK	5	Green	13
MOSI	6	Blue	11
MISO	7	Violet	12
IRQ	8	Gray	2

(*) optional

Bottom view of nRF24L01